£850.00 ex VAT
2500 Litre Steel Single Skin Oil Tank
2500 Litre (Approx 550 Gallons) single skin kerosene storage tank.
This steel tank is ideal for the storage of home heating oil.
These steel single skin home heating oil storage tanks are made from mild steel and offer an inexpensive storage option where a bunded tank is not required.
Supplied complete with:
- 2" fill + cap
- 2" fill vent + vent cap
- 1” outlet +fitting kit and isolation valve and filter.
- ½” Drain
- Lifting eye for positioning
- 2 mm thick high quality steel
- Quality Primer and top coat applied
Standard Colours = 14c39 green RAL 9005 black
Other colours are available at a surcharge.
Made From: Steel
Suitable For Fuel: Diesel, Gas Oil, Heating Oil
Tank Type: Single Skin
Capacity: 2500 litres
Weight: 180.00kg
Dimensions (l x w x h): 1680mm x 1220mm x 1220mm
2500 Litre Single Skin Tank
For some DOMESTIC oil tank installations (in England and Scotland, NOT Wales) fitting a single skin oil tank can be suitable solution.
In ALL cases, an 'oil storage risk assessment' should be carried out to determine the correct tank and installation (this can be carried out by an OFTEC approved engineer).
In brief a Bund or Bunded Tank is required in domestic situations if:
- Your tank is in Wales.
- You are storing over 2500 litres.
- Your tank is near an open drain or loose-fitting manhole.
- Your tank is within 10m of controlled water such as a river, stream etc.
- Your tank is located where any spillage could travel over hard ground to reach controlled water.
- Your tank is located within 50m of a borehole, spring or well.
- Your tank vent is not visible from the fill point (such as an extended fill point)
- Your oil use is for a building other than a single-family dwelling.
- Any other unique hazards to your site.
ALL DOMESTIC oil tanks over 2500 litres need to be bunded.
All NON-DOMESTIC oil tanks over 200 litres need to be bunded.